Implant form provides occlusal load on the largest osseous surface. | |
External thread profile provides adaptive implant cavity formation both in spongious and cancellous bones. | |
The form of macro thread provides cancellous bone condensing around the implant upon its installation. | |
Two-start micro thread keeping macro thread pitch provides additional initial implant insertion in cortical bone. | |
Round top prevents sensitive anatomical organization from damages. | |
Endosseous tissue surface is subject to sandblasting and acid etching (SLA surface). As a result, formed microporosity of 9-12 micron provides good adhesion of osseous cells. |
Flat 3510 O 3.75 мм L 10 мм |
Flat 3512 O 3.75 мм L 12 мм |
Flat 3514 O 3.75 мм L 14 мм |
Flat 3516 O 3.75 мм L 16 мм |
||
Flat 4008 O 4 мм L 8 мм |
Flat 4010 O 4 мм L 10 мм |
Flat 4012 O 4 мм L 12 мм |
Flat 4014 O 4 мм L 14 мм |
Flat 4016 O 4 мм L 16 мм |
|
Flat 4508 O 4.5 мм L 8 мм |
Flat 4510 O 4.5 мм L 10 мм |
Flat 4512 O 4.5 мм L 12 мм |
Flat 4514 O 4.5 мм L 14 мм |
Flat 4516 O 4.5 мм L 16 мм |
|
Flat 5008 O 5 мм L 8 мм |
Flat 5010 O 5 мм L 10 мм |
Flat 5012 O 5 мм L 12 мм |
Flat 5014 O 5 мм L 14 мм |
Flat 5016 O 5 мм L 16 мм |
The kit includes an implant screw-cap
Abutment with a Shoulder Shoulder Height is 1 mm |
Anatomically Straight Abutment Shoulder Height is 1 mm |
Prosthetic Analogue used for 3.5 mm, 4 mm, 4.5 mm, and 5 mm |
Ball Attachment 1 mm high | ||||
Abutment with a Shoulder Shoulder Height is 2 mm |
Anatomically Straight Abutment Shoulder Height is 2 mm |
|
Transfer Coping for Open Tray |
Ball Attachment 2 mm high | |||
Abutment with a Shoulder Shoulder Height is 3 mm |
Anatomically Straight Abutment Shoulder Height is 3 mm |
|
Plastic Coupling Device for Multiple Prosthesis |
Ball Attachment 3 mm high | |||
Abutment with a Shoulder Shoulder Height is 4 mm |
15° Anatomic Abutment Shoulder Height
|
Plastic Wide Single Coupling Device |
Screwdriver Element for Ratchet Length
|
||||
25° Anatomic Abutment° Shoulder Height
|
Transfer Coping for Open Tray |
Screwdriver Length
|
With dense bones options, 1-2 type | When soft option bone, 3-4 type |
---|---|
The Protocol is a recommendation. Final decision doctor implantologist depending on the clinical conditions |